poly

UV offset inks for printing on films

Cosmetics/spirits packaging, lenticular displays, bank and plastic cards and other print products made on non-absorbent substrates can now be produced reliably and in top quality with NewV poly.

This UV offset ink for use on non-absorbent surfaces is impressive in a whole manner of ways. In addition to its optimum adhesion, NewV poly boasts intensive, rich colours, fast curing and a high level of fount solution tolerance.

And it goes without saying that it offers you the same high quality and excellent brilliance given by all the products of the NewV family.


> NewV poly brochure (pdf) Printing processes with UV curing:

• Sheet-fed offset
• Continuous forms
• Letterpress

Special properties:

• Excellent adhesion on non-absorbent surfaces
• High colour intensity
• High fount solution tolerance
• Quick adjustment of the ink/water balance
• ITX-free formula
• Suitability for hot foil stamping and laminating

Suitable substrates:

• Pretreated PE, PVC and PP (corona or gas flame)
  or preprimed material*
• Aluminium-vaporised paper and board*
• Aluminium foils*

We recommend application of a UV varnish in order to provide effective protection
of the print image.

Product | Short information	Technical information	Safety guidelines
NewV® UV curing inks and varnishes Directions for use	> 50101E
NewV poly® - UP 5000	> 50601E	request via e-mail
NewV poly® - PANTONE® formula guide	> 50602E	request via e-mail
NewV poly® Pearlescent effects in UV offset printing Finishing in the inking unit	> 50106E	request via e-mail

* Non-absorbent substrates must have a surface tension of at least 38 mN/m in order to ensure optimum ink adhesion. In view of the large number of substrate suppliers and differentsubstrates
and substrate grades available, we recommend you carry out an adhesion test prior to beginning
the print run.