set

UV ink system for the offset process

If it’s protective jackets for books or a huge range of different types of commercial work you want to print, you can choose no better a product than NewV set. When the crucial criteria for production is the printing speed, such as in continuous-form or direct-mail production, NewV set reveals its true strengths.

This UV offset ink for use on absorbent surfaces is impressive in a whole manner of ways. In addition to intensive, rich colours, NewV set boasts fast curing, a high level of fount solution tolerance and quick adjustment of the ink/water balance.

And it goes without saying that it offers you the same high quality and excellent brilliance given by all the products of the NewV family.


> NewV set brochure (pdf) Printing processes with UV curing:

• Sheet-fed offset
• Continuous forms
• Letterpress

Special properties:

• High colour intensity
• Fast, immediate curing
• High fount solution tolerance
• Quick adjustment of the ink/water balance
• Suitable for laser printing applications

Suitable substrates:

• Coated and uncoated papers and card stocks
• Thermal papers*
• Conditionally for pretreated PE, PP (corona or gas flame)
  or preprimed material**
• Top-coated grades of board**

Product | Short information	Technical information	Safety guidelines
NewV® UV curing inks and varnishes Directions for use	> 50101E
NewV set® - UE4000 Sheet-fed offset, rotary label (letterpress) and continous forms printing	> 50201E	request via e-mail
NewV set® - UE4500 Sheet-fed offset, rotary label (letterpress) and continous forms printing	> 50202E	request via e-mail
NewV set® - UE4300 Sheet-fed offset, rotary label (letterpress) and continous forms printing	> 50203E	request via e-mail
NewV set® - UE4018 Sheet-fed offset, rotary label (letterpress) and continous forms printing	> 50204E	request via e-mail
NewV set® - PANTONE® formula guide	> 50205E	request via e-mail
NewV set® Dayglow fluorescent inks®	> 50104E	request via e-mail

* A number of thermal papers react to UV vehicles. For this reason, always carry out a test prior to beginning the print run.
** Non-absorbent substrates must have a surface tension of at least 38 mN/m in order to ensure optimum ink adhesion. In view of the large number of substrate suppliers and different substrates
and substrate grades available, we recommend you carry out an adhesion test prior to beginning
the print run.